Filter
Top Products
87
APPENDIX
B
B Safety, Maintenance, and Ergonomics
Important Safety Information
For your own safety and that of your equipment, always take the following precautions.
Disconnect the power plugs (by pulling the plug, not the cord) if any of the following
conditions exists:
m the power cord or plug becomes frayed or otherwise damaged
m you spill something into the case
m your Xserve RAID system is exposed to rain or any other excess moisture
m your system has been dropped or the case has been otherwise damaged
m you want to clean the case (use only the recommended procedure described later)
Be sure that you always do the following:
m Keep your system away from sources of liquids, such as washbasins, bathtubs, shower
stalls, and so on.
m Protect your system from dampness or wet weather, such as rain, snow, and so on.
m Read all the installation instructions carefully before you plug your system into a wall
socket or power strip.
m Keep these instructions handy for reference by you and others.
m Follow all instructions and warnings dealing with your system.
Electrical equipment may be hazardous if misused. Operation of this product, or similar
products, must always be supervised by trained personnel. Do not allow children access to
the interior of any electrical product and do not permit them to handle any cables.
This system is certified as a component for use only with equipment for which the suitability
of the combination has been determined by a Nationally Recognized Testing Laboratory.
Important The only way to disconnect power completely is to unplug the two power cords.
Make sure at least one end of each power cord is within easy reach so that you can unplug
the Xserve RAID when you need to.