Filter
Top Products
117
ARCHTTP PROXY SERVER INSTALLATION
(1).Run the archttp64 using Terminal.app by using the following
command:
Usage: sudo ./archttp64 (TCP_PORT).
Parameters: TCP_PORT value= 1~65535 (If TCP_PORT assigned,
Archttp will start from this port. Otherwise, it will use the setting
in the archttpsrv.conf or default 81). This is the port address
assigning for the rst adapter.
Such as: sudo ./archttp64 1553
(2). Archttp server console started, Controller card detected then
ArcHttp proxy server screen appears.
Copyright (c) 2004 Areca, Inc. All Rights Reserved.
Areca HTTP proxy server V1.80.240 for Areca RAID controllers.
Controller(s) list
--------------------------------------------
Controller[1](PCI) : Listen to port[1553].
Cfg Assistant : Listen to port[1554].
Binding IP:[0.0.0.0]
Note: IP[0.0.0.0] stands for any ip bound to this host.
--------------------------------------------
##############################
Press CTRL-C to exit program!!
##############################
Controller [1] Http: New client [9] accepted
Controller [1] Http: New Recv 243 bytes
Controller [1] Http: Send [174] bytes back to the client
5.6 ArcHttp Conguration
The ArcHttp proxy server will automatically assign one additional
port for setup its conguration. If you want to change the "archttp-
srv.conf" setting up of ArcHttp conguration, For example: General
conguration, Mail Conguration, and SNMP Conguration, please
start Web Browser by entering http://[Computer IP Address]:[cfg
port number]