INTRODUCTION
20
transparently while the volumes are online, but, at the end of
the process, the operating system will detect free space at after
the existing volume.
Windows, NetWare and other advanced operating systems sup-
port volume expansion, which enables you to incorporate the
additional free space within the volume into the operating sys-
tem partition. The operating system partition is extended to
incorporate the free space so it can be used by the operating
system without creating a new operating system partition.
You can use the Diskpart.exe command line utility, included with
Windows Server 2003 or the Windows 2000 Resource Kit, to ex-
tend an existing partition into free space in the dynamic disk.
Third-party software vendors have created utilities that can be
used to repartition disks without data loss. Most of these utilities
work ofine. Partition Magic is one such utility.
1.4 High availability
1.4.1 Global Hot Spares
A Global Hot Spare is an unused online available drive, which is
ready for replacing the failure disk. The Global Hot Spare is one
of the most important features that SATA RAID controllers provide
to deliver a high degree of fault-tolerance. A Global Hot Spare
is a spare physical drive that has been marked as a global hot
spare and therefore is not a member of any RAID set. If a disk
drive used in a volume set fails, then the Global Hot Spare will
automatically take its place and he data previously located on the
failed drive is reconstructed on the Global Hot Spare.
For this feature to work properly, the global hot spare must have
at least the same capacity as the drive it replaces. Global Hot
Spares only work with RAID level 1, 1E, 3, 5, or 6 volume set.
You can congure up to three global hot spares with ARC-11xx/
12xx.
The Create Hot Spare option gives you the ability to dene a