Filter
Top Products
HARDWARE INSTALLATION
55
SNMP Manager Console Integration
• Out of Band-Using Ethernet port (12/16/24-port Control-
ler)
Before launching the rmware-embedded SNMP agent in the
sever, you need rst to enable the reware-embedded SNMP
agent function on your SATA RAID controller. If you need
additional information about installation and start-up this
function, see the section 6.8.4 SNMP Conguration (12/16/24-
port)
• In-Band-Using PCI-X/PCIe Bus (4/8/12/16/24-port
Controller)
Before launching the SNMP agent in the sever, you need rst to
enable the reware-embedded SNMP community conguration
and install Areca SNMP extension agent in your server system.
If you need additional information about installation and start-up
the function, see the SNMP Operation & Installation section in the
Appendix C
Single Admin Portal (SAP) Monitor
This utility can scan for multiple RAID units on the network and
monitor the controller set status. It also includes a disk stress test
utility to identify marginal spec disks before the RAID unit is put
into a production environment.
For additional information, see the utility manual in the packaged
CD-ROM or download it from the web site http://www.arec.com.tw