Filter
Top Products
5-285-28
5-285-28
5-28
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.4.25.4.2
5.4.25.4.2
5.4.2
IntelIntel
IntelIntel
Intel
®®
®®
®
RAID configurations RAID configurations
RAID configurations RAID configurations
RAID configurations
This motherboard supports RAID 0 and RAID 1 configurations for Serial ATA
hard disks drives through the Intel
®
ICH7-M (DH) Southbridge chip.
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Main MenuMain Menu
Main MenuMain Menu
Main Menu, select
IDE ConfigurationIDE Configuration
IDE ConfigurationIDE Configuration
IDE Configuration, then press <Enter>.
3. Select the item
ATA/IDE ConfigurationATA/IDE Configuration
ATA/IDE ConfigurationATA/IDE Configuration
ATA/IDE Configuration, then press <Enter> to
display the configuration options.
4. From the configuration options, choose [Enhanced], then press
<Enter> to set.
5. Select the item
Configure SATA AsConfigure SATA As
Configure SATA AsConfigure SATA As
Configure SATA As, then press <Enter> to display
the configuration options.
6. From the configuration options, choose [RAID], then press <Enter> to
set.
7. Save your changes, then exit the BIOS Setup.
Refer to the Chapter 4 of the motherboard user guide for details on
entering and navigating through the BIOS Setup.