Filter
Top Products
5-425-42
5-425-42
5-42
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows
®
2000/XP and later operating system on a hard disk drive that is included in
a RAID set.
To create a RAID driver disk:
1. Place the motherboard support CD into the CD-ROM drive.
2. Select
Make DiskMake Disk
Make DiskMake Disk
Make Disk tab.
3. From the
Make Disk Make Disk
Make Disk Make Disk
Make Disk menu, select the RAID driver disk you want to
create or browse the contents of the support CD to locate the driver
disk utility.
Refer to section “5.2.4 Make Disk menu” for details.
4. Insert the floppy disk into floppy disk drive.
5. Follow succeeding screen information to complete process.
6. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6
key to install third-party SCSI or RAID driver.
2. Press <F6>
then insert the floppy disk with RAID driver into the floppy
disk drive.
3. When prompted to select the SCSI adapter to install, make sure you
select
Intel(R) 82801GHM SATA RAID Controller (MobileIntel(R) 82801GHM SATA RAID Controller (Mobile
Intel(R) 82801GHM SATA RAID Controller (MobileIntel(R) 82801GHM SATA RAID Controller (Mobile
Intel(R) 82801GHM SATA RAID Controller (Mobile
ICH7MR/DH)ICH7MR/DH)
ICH7MR/DH)ICH7MR/DH)
ICH7MR/DH) and
JMicron JMB 363JMicron JMB 363
JMicron JMB 363JMicron JMB 363
JMicron JMB 363.
4. Follow the succeeding screen instructions to complete the installation.