Filter
Top Products
5-365-36
5-365-36
5-36
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.4.35.4.3
5.4.35.4.3
5.4.3
JMicronJMicron
JMicronJMicron
JMicron
®®
®®
®
RAID Configuration RAID Configuration
RAID Configuration RAID Configuration
RAID Configuration
The JMicron
®
Serial ATA controller allows you to configure RAID 0 and RAID
1 sets on the external Serial ATA hard disk drives.
Before creating a RAID setBefore creating a RAID set
Before creating a RAID setBefore creating a RAID set
Before creating a RAID set
Prepare the following items:
1. At two HDDs, preferably with the same model and capacity.
2. A white floppy disk
3. Microsoft
®
Windows
®
OS installation disk (Windows 2000/XP/2003)
4. Motherboard support CD with JMB363 driver
Complete the following steps before you create a RAID set:
1. Install the external Serial ATA hard disk drives (HDDs) on your system.
2. Set the
OO
OO
O
nboard JMB363 Serial -ATA nboard JMB363 Serial -ATA
nboard JMB363 Serial -ATA nboard JMB363 Serial -ATA
nboard JMB363 Serial -ATA item in the BIOS to
[RAID]. See section “4.4.4 Onboard Devices Configuration” for details.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Configure Win627EHF Super IO Chipset
Onboard JMB363 Serial-ATA [RAID]
Onboard PCIEX GbE LAN [Enabled]
LAN Option ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Onboard Game/MIDI Port [Disabled]
Onboard 1394 Controller [Enabled]
Onboard JMB363 Serial-
3. Enter the JMB363 RAID BIOS utility to set up your RAID configuration.
4. Create a JMB363 RAID driver disk for Windows
®
OS installation. See
section “5.5 Creating a RAID driver disk” for details.
5. Install the JMB363 driver after the Windows
®
OS had been installed.