Filter
Top Products
ASUS N4L-VM DHASUS N4L-VM DH
ASUS N4L-VM DHASUS N4L-VM DH
ASUS N4L-VM DH
5-415-41
5-415-41
5-41
Resetting disks to non-RAIDResetting disks to non-RAID
Resetting disks to non-RAIDResetting disks to non-RAID
Resetting disks to non-RAID
When you install an HDD that has been configured as part of another
RAID set, you may convert this broken RAID HDD to non-RAID mode. All
original data, however, will be lost.
To prevent damage to your system, you cannot select the HDD when
configuring a RAID set through the JMB363 utility.
To reset disks to non-RAID:
1. In the main JMB363 RAID BIOS menu, highlight
Revert HDD toRevert HDD to
Revert HDD toRevert HDD to
Revert HDD to
non-RAID non-RAID
non-RAID non-RAID
non-RAID using the up/down arrow key then press <Enter>.
2. Use the space bar to select the HDD that you want to reset to
non-RAD.
A selected HDD shows a
sign before it.
3. A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Saving the settings and exiting setupSaving the settings and exiting setup
Saving the settings and exiting setupSaving the settings and exiting setup
Saving the settings and exiting setup
When you have finished, highlight
Save & Exit Setup Save & Exit Setup
Save & Exit Setup Save & Exit Setup
Save & Exit Setup using the up/down
arrow key then press <Enter> to save the current RAID configuration and
exit the JMB363 RAID BOS utility.
A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N> to return to the JMB RAID BIOS menu.