Filter
Top Products
ASUS N4L-VM DHASUS N4L-VM DH
ASUS N4L-VM DHASUS N4L-VM DH
ASUS N4L-VM DH
2-272-27
2-272-27
2-27
3.3.
3.3.
3.
IntelIntel
IntelIntel
Intel
®®
®®
®
ICH7-M DH Southbridge Serial ATA connectors ICH7-M DH Southbridge Serial ATA connectors
ICH7-M DH Southbridge Serial ATA connectors ICH7-M DH Southbridge Serial ATA connectors
ICH7-M DH Southbridge Serial ATA connectors
(7-pin SATA0 [black], SATA2 [black])(7-pin SATA0 [black], SATA2 [black])
(7-pin SATA0 [black], SATA2 [black])(7-pin SATA0 [black], SATA2 [black])
(7-pin SATA0 [black], SATA2 [black])
These connectors are for the Serial ATA signal cables for Serial ATA I
(1.5 Gb/s) hard disk and optical disk drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0,
RAID 1, and Intel
®
Matrix Storage configuration through the onboard
Intel
®
RAID controller. Refer to section “5.4.2 Intel
®
RAID
configurations” for details on how to set up Serial ATA RAID
configurations.
The RAID function of these connectors is set to [Disabled] by default. If
you intend to create a Serial ATA RAID set using these connectors, set
the
Configure SATA As Configure SATA As
Configure SATA As Configure SATA As
Configure SATA As item in the BIOS to [RAID]. See section
“4.3.5 IDE Configuration” for details.
®
N4L-VM DH
N4L-VM DH IDE connector
NOTE: Orient the red marking
s
(usually zigzag) on the IDE
ribbon cable to PIN 1.
IDE
PIN 1
®
N4L-VM DH
N4L-VM DH SATA connectors
SATA0
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA2