Filter
Top Products
2-202-20
2-202-20
2-20
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
Card installationCard installation
Card installationCard installation
Card installation
Before installing the R-DVI-ADD2/R-DVI-ADD2-L card, make sure that
your system meets the following requirements.
System requirements
• Intel
®
Pentium™ 4 system with Intel
®
945GT/945GM chipset
• Minimum 64 MB system memory
• PCI Express x16 slot
• Windows
®
98 SE/ME/2000/XP operating system
The drivers for the R-DVI-ADD2/R-DVI-ADD2-L card are included in
the support CD that came with your Intel
®
945GT/945GM
motherboard. Install the card drivers from the support CD after
installing the card to the system.
Installing the card
Follow these steps to install the R-DVI-ADD2/R-DVI-ADD2-L card.
Before handling the card, touch a bare metal portion of your
computer to discharge static electricity from your body. Wear a wrist
strap grounded to the computer chassis when handling the card.
1. Make sure that the computer is turned off. Unplug the system
power cord from the electrical socket.
2. Remove the computer cover, then locate the PCI Express x16 slot.
Refer to the motherboard user guide for the slot location.
3. Remove the rear panel bracket opposite the PCI Express x16 slot.
Keep the bracket screw for later use.
4. Carefully insert the card to the slot until it fits completely.
5. Secure the card with the screw that you removed earlier.
6. Replace the computer cover, then plug the system power cord to
an electrical socket.
7. Connect the display device to the DVI-D port using a DVI-D cable,
then turn on the computer.
Enabling DVI display and changing resolutionsEnabling DVI display and changing resolutions
Enabling DVI display and changing resolutionsEnabling DVI display and changing resolutions
Enabling DVI display and changing resolutions
All Intel
®
945GT/945GM (Grantsdale G) video drivers provided by
Intel
®
have built-in support to enable the ADD2 cards. All the
necessary drivers are available from Intel
®
.