Filter
Top Products
2-22-2
2-22-2
2-2
Chapter 2: InstallationChapter 2: Installation
Chapter 2: InstallationChapter 2: Installation
Chapter 2: Installation
2.1 Card installation
2.1.12.1.1
2.1.12.1.1
2.1.1
System requirementsSystem requirements
System requirementsSystem requirements
System requirements
Before installing the WiFi-TV card, make sure that your system meets the
following requirements.
• Intel
®
Pentium™ 4 600+ series processor
AMD Athlon™ processor
• Windows
®
2000/XP/2003 Server
• 64 MB system memory (minimum)
• Microsoft DirectX 9.0 or higher
• Windows Media Player 9 or higher
• Optical drive for utilities and driver installation
• Available PCI slot
• Local digital or analog cable TV subscription
2.1.22.1.2
2.1.22.1.2
2.1.2
Installing the cardInstalling the card
Installing the cardInstalling the card
Installing the card
To install the WiFi-TV card:
1. Remove the system unit
cover (if your motherboard is
already installed in a chassis).
2. Remove the bracket opposite
the PCI slot that you intend
to use. Keep the screw for
later use.
3. Align the card connector with
the slot and press firmly until
the card is completely seated
on the slot. Refer to the
drawing on the right.
4. Secure the card to the
chassis with the screw you
removed earlier.
5. Replace the system cover.