Filter
Top Products
CL-1758 User Manual
12
Single Stage Installation
To set up a single stage installation, refer to the installation diagram on the next
page (the numbers in the diagram correspond to the numbers of the installation
steps), and do the following:
1. If you choose to install an external console, plug your keyboard, monitor,
and mouse into the Console Ports located on the switch's rear panel. The
ports are color coded and marked with an appropriate icon to indicate
themselves.
2. Using a KVM cable set (described in the Cables section on p. 4), plug the
custom SPHD connector into any available KVM Port on the switch.
3. At the other end of the cable:
a) For a USB connection, plug the USB and video connectors into their
respective ports on the computer.
b) For a PS/2 connection plug the keyboard, mouse and video connectors
into their respective ports on the computer.
Note: Repeat steps 2 and 3 for any additional computers you are installing.
4. Use the Power cord provided with this package to connect the switch's
Power Socket to an AC power source.
This completes the single stage installation, and you can power on the switch.
After the switch has been powered on, you can turn on the power to the
computers.
Note: The CL-1758 initially links to the first port when you turn it on.