Filter
Top Products
CL-1758 User Manual
46
Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the
following:
1. Invoke HKM (see p. 41).
2. Press and release the [B] key.
The Beeper toggles On or Off. The Command Line displays Beeper On or
Beeper Off for one second; then the message disappears and you automatically
exit Hotkey Mode.
Restore Default Settings
To reset the CL-1758 to its default hotkey settings, do the following:
1. Invoke HKM (see p. 41).
2. Press [R] [Enter].
All hotkey settings return to the factory default settings. See OSD Factory
Default Settings, page 65, for a list of default settings.