Filter
Top Products
Chapter 4. OSD Operation
37
(Continued from previous page.)
(Continues on next page.)
Setting Function
EDIT PORT
NAMES
To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names. To Edit a port
name:
1. Click the port you want, or use the Navigation Keys to move the
highlight bar to it, then press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
15. Legal characters include:
All alpha characters: a - z; A - Z
(Case does not matter; the OSD displays the Port Name in
all capitals no matter how they were keyed in.
All numeric characters: 0 - 9
+ - / : . and Space
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
DEFAULT
VALUES
This function is used to undo all changes and return the setup to
the original factory default settings (see OSD Factory Default
Settings, page 65) - except for the Names settings that were
assigned to the Ports, which are saved.
CLEAR THE
NAME LIST
This function is similar to Restore Default Values. The difference is
that it also clears the Names settings along with undoing all
changes and returning the setup to the original factory default
settings.
ACTIVATE
BEEPER
Choices are Y (for Yes), or N (for No). When activated, the beeper
sounds whenever a Port is changed; when activating the Auto
Scan function (see F7 SCAN, p. 39); or an invalid entry is made on
an OSD menu. The default is Y (activated).