ATEN Technology CL1758M Switch User Manual


 
Appendix
69
3. Slide the switch onto the support flanges. Use the screws supplied with
this package to loosely attach the front of the switch to the front of the rack
(only tighten the screws part way).
4. Slide the rear attachment sliding brackets along the slide bars until they
contact the rear of the switch, then use the screws supplied with this
package to attach the bars to the rear of the switch (tighten the screws all
the way).
(Continues on next page.)
Phillips I head
M4 x 6
Phillips I head
M4 x 6