Filter
Top Products
KH98 User Manual
34
F7 SCAN:
Clicking the F7 field or pressing [F7] invokes Auto Scan Mode. This function
allows you to automatically switch among the available computers at regular
intervals so that you can monitor their activity without having to take the
trouble of switching manually.
The selection of computers to be included for Auto Scanning is made with
the Scan Mode setting under the F3 SET function (see p. 24).
The amount of time that each Port displays for is set with the Scan
Duration setting under the F3 SET function (see p. 24). When you want to
stop at a particular location, press the [Spacebar] to stop scanning and exit
Auto Scan Mode.
If the scanning stops on an empty port, or one where the computer is
attached but is powered Off, the monitor screen will be blank, and the
mouse and keyboard will have no effect. Simply wait - after the Scan
Duration time is up, the Scan function will move on to the next port.
As each computer is accessed, an S appears in front of the Port ID display
to indicate that it is being accessed under Auto Scan Mode.
While Auto Scan Mode is in effect, the console will not function normally.
You must exit Auto Scan Mode in order to regain control of the console.
While you are in Auto Scan Mode, you can pause the scanning in order to
keep the focus on a particular computer either by pressing [P], or with a
Left Click of the mouse. See Invoking Auto Scan, page 40, for details.
Press [Esc] to stop Auto Scan and return to the port where Auto Scan was
invoked. Alternatively, press [Spacebar] to stop Auto Scan.
KH98.book Page 34 Thursday, April 26, 2007 5:48 PM