Filter
Top Products
1
Chapter 1
Introduction
Overview
The KL1508 / KL1516 series of Cat 5 Dual Rail LCD KVM Switches are
control units that allow access to multiple computers from a single KVM
(keyboard, video, and mouse), console. A single KL1508 / KL1516 can control
up to 8 or 16 computers, respectively. They consist of an integrated LCD
monitor, keyboard, and touchpad in a in a 1U rack-mountable retractable
sliding housing.
The similarities and differences among the models in the KL1508 / KL1516
series are shown in the following table:
The LCD and keyboard/touchpad modules slide independently of each other.
To maximize space in your data center, the keyboard/touchpad module slides
back to "hide away" when not in use, while the thin profile LCD monitor
rotates back – flush against the rack – allowing administrators to monitor
computer activity on the installation.
For increased reliability and efficiency, RJ-45 connectors and CAT 5 cable are
used to link to the computers. Combined with Auto Signal Compensation
(ASC), 1280 x 1024 @ 75Hz signals can travel up to 40 m (130') – eliminating
the need for KVM extenders. Utilizing PS/2 and USB KVM Adapter Cables
for the final linkup, the KL1508 / KL1516 permits any combination of PCs,
Macs, Sun computers, and serial devices to coexist on the installation.
A single KL1508 / KL1516 can control up to 8 / 16 computers. As many as 31
additional KH1508 / KH1516 switches can be daisy chained from the original
unit, so that up to 512 computers can all be controlled from the original KVM
console. For added convenience, an extra console port is provided on the rear
panel to manage the LCD KVM switch from an external console (monitor,
keyboard, and mouse) up to 20 meters away, and an external PS/2 mouse can
be used instead of the touchpad.
Model LCD Panel Ports
KL1508M 17" 8
KL1508N 19" 8
KL1516M 17" 16
KL1516N 19" 16