Filter
Top Products
Chapter 4. OSD Operation
35
(Continued from previous page.)
Setting Function
PORT ID
DISPLAY
MODE
Selects how the Port ID is displayed: the Port Number alone (PORT
NUMBER); the Port Name alone (PORT NAME); or the Port Number
plus the Port Name (PORT NUMBER + PORT NAME). The default is
PORT NUMBER + PORT NAME).
SCAN
DURATION
Determines how long the focus dwells on each port as it cycles through
the selected ports in Auto Scan Mode (see F7 SCAN, page 42). Key in
a value from 1–255 seconds, then press [Enter]. Default is 5 seconds;
a setting of 0 disables the Scan function.
SCAN/SKIP
MODE
Selects which computers will be accessed under Skip Mode (see F5
SKP, page 40), and Auto Scan Mode (see F7 SCAN, page 42).
Choices are:
ALL
—All the Ports which have been set Accessible (see SET
ACCESSIBLE PORTS, page 38);
QUICK VIEW—Only those Ports which have been set Accessible and
have been selected as Quick View Ports (see SET QUICK VIEW
PORTS, page 38);
POWERED ON
—Only those Ports which have been set Accessible
and are Powered On;
QUICK VIEW + POWERED ON—Only those Ports which have been
set Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
SCREEN
BLANKER
If there is no input from the console for the amount of time set with this
function, the screen is blanked. Key in a value from 1–30 minutes, then
press [Enter]. A setting of 0 disables this function. The default is 0
(disabled).
HOTKEY
COMMAND
MODE
Enables / Disables the Hotkey function (see Hotkey Operation,
page 45), in case a conflict with programs running on the computers
occurs.
HOTKEY This setting selects the Hotkey invocation keys (see Hotkey Operation,
page 45). Choices are [NUM LOCK] + [-], or [CTRL] + [F12]. The
default is [NUM LOCK] + [-].