Filter
Top Products
KL1508 / KL1516 User Manual
36
F4 ADM
F4 is an Administrator only function. It allows the Administrator to configure
and control the overall operation of the OSD. To change a setting Double Click
it; or use the Up and Down Arrow Keys to move the highlight bar to it, then
press [Enter].
After you select an item, a submenu with further choices appears. Double Click
the choice you want, or move the Highlight Bar to it, then press [Enter]. An
icon appears before the selected choice so that you know which one it is. The
settings are explained in the following table:
(continues on next page)
Setting Function
SET
USERNAME
AND
PASSWORD
This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select the Administrator field or one of the User fields, a
screen that allows you to key in your Username and Password
appears. The Username and Password may be up to 12 characters
long, and can consist of any combination of letters and numbers
(A–Z, a–z, 0–9).
3. For each individual, key in the Username and Password, then press
[Enter].
4. To modify or delete a previous Username and/or Password, use the
backspace key to erase individual letters or numbers.
SET
LOGOUT
TIMEOUT
If there is no input from the console for the amount of time set with this
function, the Operator is automatically logged out. A login is necessary
before the console can be used again.
This enables other Operators to gain access to the computers when
the original Operator is no longer accessing them, but has forgotten to
log out. To set the timeout value, key in a number from 1–180 minutes,
then press [Enter]. If the number is 0 (zero), this function is disabled.
Default is 0 (disabled).