Filter
Top Products
Configuration Parameters
Issue 1.0 June 2002 41
The following configuration parameters are not presented on the ADU tab in IC Manager. You can
set them on the Config tab of the ADU Server Editor dialog.
Name Description
filter
(filter)
Sets the filter for determining which ADU events are sent to the HISTMAP server (the
Report Server). The event types are start, change, delete, transfer, user, and data. A
plus sign (+) marks the event type for storage, a minus sign (–) excludes the event
type from storage.
End
events cannot be filtered out.
The
data
parameter encompasses all event types.
-data
is the default.
Each filter criterion must be entered on a separate line, with subsequent lines taking
precedence.
Examples:
–data
+
change
only
change
and
end
events are stored
+change
–
data
only
end
events are stored
Note that
drop
and
watch
events are sent to clients but are not included with the
+data
filter.
aduhskeepname
(reportkeepname)
Names of data elements in ADU events to be sent to the server specified with the
Eventsink configuration parameter.
Each element must be entered on a separate line.
If this parameter is not used, all data elements are sent. (The ADUID field is always
stored.) Use of wildcards is permitted. Use this parameter with care. Filtering
elements from the End event may adversely affect reporting capability.
gencount Specifies the number of instances of a subcontainer created with the + token that can
exist at one time. If more than this number are created the earliest is deleted. For
example, to limit the number of subcontainers of the ts container, you could set
gencount to ts.3. When ts.+ creates ts.4, ts.1 is deleted. When ts.5 is created, ts.2
is deleted, and so on. The default is 0, which specifies no limit (all generations of a
subcontainer are kept). The gencount value should be set to accommodate the
maximum number of active contacts for each media channel.
padwidth Specifies the number of digit positions required in a container name token. Numbers
are padded with zeroes to this position. For example, to specify the number of digit
positions for the second token of the ts container, you could set padwidth to ts.4.
Subcontainers would then be named ts.0001, ts.0002, and so on. The default is 0,
which specifies no padding.
autostart Specifies whether the server should start automatically at the same time as the ORB
Server. Values: true, false.
timetype Sets ADU server timestamp format. The only supported value for this version is gmt
(lower case).