Filter
Top Products
Chapter 5 ADU Server Configuration
42 Agent Data Unit Server Programmer’s Guide
The following settings are on the Debug tab of the ADU Server Editor.
Note: Previous versions of Avaya IC included the ADU History Server. To support existing
installations, send the events to an existing ADU History Server.
1 Use the default for the Eventsink parameter (HISTMAP.EventsIn) to send events to the
Reporting server.
2 Set the Reporting servers’s eventforward parameter to ADUHS.EventsIn. The Reporting server
forwards all ADU events to the ADUHS.
Name Description
logfilesize The maximum size of the log file. The default log file size is 2,560,000 bytes. The
minimum is 1000 bytes and the maximum is 50,000,000 bytes.
Ping Interval
pingtimer
The number of seconds between messages that are sent to a server to determine if it
is running. The default is 60 seconds and the minimum is 1 second.
trace The trace parameter can contain any number of the following settings, comma
separated, no spaces permitted. This following list works for MTT servers. STT
servers have some minor differences..
idl – Whether requests, responses and events are logged
flush – Whether the logged information if forced to disk after each significant
operation
timing – Whether requests have timing information logged
explain – Whether requests explain which server they were sent to, and why
on – Whether logging happens at all
thread – Whether each log entry contains the id of the thread that wrote it
usr1 through usr8 – For use by third party implementers.
dev1 – reserved
appverbose – Used by individual applications.
appwarn – Used by individual applications.
debug – Used by individual applications.
debug2 – Used by individual applications.