Filter
Top Products
10 CCM4850 Installer/User Guide
To reinitialize the CCM appliance:
1. Locate the recessed INIT button on the front of the CCM appliance. An opened paper clip may
be used to depress the button.
2. Insert the end of the opened paper clip in the recess, then depress and hold the button. The
ONLINE LED will blink, indicating an initialization has been requested. You have approxi-
mately seven seconds to release the button before any action is taken.
After seven seconds, the ONLINE LED will blink more rapidly to confirm that the CCM
configuration database has been erased. Continuing to hold the INIT button for a few more
seconds will erase the IP address as well. The ONLINE LED will blink faster to confirm
the deletion.
If any portion of FLASH is erased, the CCM appliance reboots when the INIT button is released.
You may also use the Server FLASH command to update the CCM FLASH application or boot
program. For more information, see Server FLASH command on page 50.