Filter
Top Products
Chapter 3: Operations 21
To add a user:
Issue a User Add command.
USER ADD <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>]
You must specify a username. You must also specify a password or SSH user key information, or
you may specify both. You may also include an access level or access rights. For more information,
see Connecting to devices using SSH on page 15, Access rights and levels on page 21 and User Add
command on page 65.
To change a user’s configuration information:
Issue a User Set command.
USER SET <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>]
You may change your own password at any time. You must have USER access rights to change
another user’s password or to change any user’s SSH user key information and access rights.
To remove an SSH user key or password, specify Key=“” or Password=“”. You cannot remove
both the password and the SSH key from a user’s definition; one must remain in the user database.
Also, you cannot remove a user’s key or password if that removal would result in no valid users
having USER access rights.
For more information, see Connecting to devices using SSH on page 15, Access rights and levels on
page 21 and User Set command on page 67.
To delete a user:
Issue a User Delete command.
USER DELETE <username>
If the specified user is currently logged in, a message is sent to the user indicating that access is no
longer permitted, and the user’s Telnet session is terminated. For more information, see User
Delete command on page 66.
To display user configuration information:
1. To display information about one user, issue a Show User command, specifying the username.
SHOW USER <username>
2. To display information about all users, issue a Show User command with the All parameter.
SHOW USER ALL
For more information, see Show User command on page 63.
Access rights and levels
Most CCM appliance commands require the user to have the appropriate permission to issue CCM
appliance commands. Permissions are expressed as access rights or access levels. The access rights