Badger Basket RAD-IOM-01 Personal Computer User Manual


 
THE BADGER
®
-RADIX
®
User Guide
February 2007
Page 25 of 73
To change the direction of the meter reading, press the “A” Hot Key. The Badger-Radix
will display the direction of the reading by showing an arrow pointing to the left next to
the reading field. When you enter a meter reading now, the reading will be shown on the
display from right to left. Using the same example, if you entered 382 going from right
to left (the arrow pointing to the left), you’d see this screen.
In either case, when the meter reading is completely entered, press the “Enter” key
located on the upper left hand corner of the keypad. To cancel the entry, press the “C”
key. To switch back to Left to Right manual reads, press the “D” Hot Key.
High and Low Limits for Manual Meter Readings
If the reading is within the high and low limits, the Badger-Radix will record the meter
reading and advance the display to the next meter. If the reading is above the high limit
or below the low limit, the Badger-Radix will beep twice for high and three times for low
and tell you that the entered meter reading was high or low. It will ask you to re-enter the
reading. This is what you will see if you enter a reading that is above the high limit.