Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 01
25
5.1.1 Connect Info
▪ Select the connection method to be either RS-232 and Ethernet (UDP) by
clicking the corresponding radio buttons
▪ For RS-232 control, enter the COM port number of your PC and select baud
rate. The baud rate of your PC should be the same as the MATRIXPRO-II DVI
16x16 baud rate. (115200 is default)
▪ For Ethernet control, enter the IP address of the MATRIXPRO-II DVI 16x16 and
port number. 3000 is the default port number for the MATRIXPRO-II DVI 16x16.
▪ Click save button and close Set Config window then click Connect button on PC
program of MATRIXPRO-II DVI 16x16 to start it.
▪ If the connection is properly made, current status of MATRIXPRO-II DVI 16x16
will be shown at the bottom side of PC program.