Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 01
33
7.2.3 Network setting
▪ Sets the IP, Gateway, Subnet mask, MAC address and UDP port number.
▪ Requests current network setting.
Command Description and reply
NETGW=192.168.1.1!
Sets Gateway address, each data ranges from 000 to 255.
Reply: NETGW=192.168.001.001!
NETIP=192.168.1.118!
Sets IP address, each data ranges from 000 to 255.
Reply: NETGW=192.168.001.118!
NETSN=255.255.255.0!
Sets Subnet mask address, each data ranges from 000 to
255.
Reply: NETSN=255.255.255.000!
NETPA=AA.BB.CC.DD.EE.FF!
Sets MAC address, each data ranges from 00 to FF.
Reply: NETPA= AA.BB.CC.DD.EE.FF!
NETPT=3000!
Sets UDP port number, data ranges from 0 to 65535.
NETPT=3000!
NET=?!
Requests current network setting.
Reply: NETGW=192.168.001.001!
NETIP=192.168.001.118!
NETSN=255.255.255.000!
NETPA=AA.BB.CC.DD.EE.FF!
NETPT=3000!
Table 7-4 : Network setting command examples
7.2.4 Monitor output port setting
▪ Makes an input connected to the Monitor Output port.
▪ Requests input port that is currently connected to the Monitor Output port.
Command Description and reply
MON=13!
Makes input 13 connected to monitor output ports.
Reply: MON=13!
MON=?!
Requests current input port that connected to monitor
output port.
Reply: MON=13!
Table 7-5: Monitor output setting command examples
7.2.5 EDID control command
▪ It stores EDID information in input port of MATRIXPRO-II DVI 16x16 .
▪ It requests current EDID setting for all input ports.