Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 01
27
▪ Default mode is the default EDID as set the factory. Selecting this mode will
restore the default EDID on the selected input channels.
▪ Auto Mix mode is an advanced EDID mode. In the mode the unit reads all EDID
of attached displays and creates and custom input EDID.
▪ Output Copy mode reads the EDID from any selected output channel and
copies it into an input port. Select the output channel first and then click the
input channels. Click the Apply button to save settings.
▪ Edit Data Mode is used to modify existing EDIDs or to make a new custom
EDID. This feature is recommended for advanced users only.
5.3 Operation
The communication settings and system status are on the right side of the control
application as shown below. After clicking the Connect button (Refer to Chap. 4.1.1),
the MatrixPRO-II DVI is ready to receive commands from user.
Improper EDID setting can compromise the stability of the system. Not all computer
graphics cards will be able to output a custom EDID resolution. Be sure you fully
understand this feature prior to use.
For further information, please contact folsomsupport@barco.com