Filter
Top Products
PFWX-51B/PFWU-51B 10/02/2014
6
2.General
the internal optical units will be noneffective and impracticable. Damage of this nature is under no circumstances covered
under the manufacturer’s warranty and may deem the warranty null and void. In such a case the client shall be held solely
responsible for all costs incurred during any repair. It is the clients responsibility to ensure at all times that the projector
is protected from the harmful effects of hostile airborne particles in the environment of the projector. The manufacturer
reserves the right to refuse repair if a projector has been subject to knowingly neglect, abandon or improper use.
Main Power requirements
The PFWX-51B/PFWU-51B projector operates from a nominal mono phase power net with a separate earth ground PE.
Projector Power requirements
PFWX-51B AC INPUT 100-240V 4.8A 50/60Hz
PFWU-51B AC INPUT 100-240V 4.8A 50/60Hz
The power cord required to connect the projector with the power net is delivered with the projector.
Projector weight
Do not underestimate the weight of the PFWX-51B/PFWU-51B projector. The projector weights about ±12 kg (±26.5 lb.)
without lens. Be sure that the pedestal or ceiling mount on which the projector has to be installed is capable of handling five (5)
times the complete load of the system.
2.2
Unpacking the projector
1. Remove the tape around the carton box, then open the box.
2. Take out the foam upper the projector.
3. Take out the projector.