Filter
Top Products
3. OVERVIEW USER’s CONTROLS
How to reinstall the address
By removing the batteries, the address in the Remote Control will be set to 0. In case the different modules are controlled separately
(own address), the resp ective address of the module you desire to control has to be set. To reinstall an address, follow procedure
below:
1. Point t he Remote Control to the module o f which you want to kno w the address and press the address button (use a pencil).
(image 3-9)
On the screen appears am essage box (image 3-10) indicating the address number. In theg raphical display ofthe Cine VERSUM
Master appears the same message (image 3-11).
2. To adapt the address in the Rem ote Co ntrol, cover the IR transmitting diodes and press the address button once, followed within
the 5 seconds by pressing the corresponding digit button, 1 to 8.
Image 3-9
Image 3-10
Message address on-screen
Image 3-11
Message address display master
3.5.3 Visualization of commands
How the commands are visualized
When a button on the Remote Control or the dial knob on the Cine VERSUM Master is pressed, the command is visualized on the
screen of the plasma display or of the projector and also on the graphical display of the Cine VERSUM Master. This can take the
form of a men u, a message or a bar scale. Below a n illustration of each item:
Image 3-12
On-screen main menu
Image 3-13
Main menu on Master display
R5976490 C INE VERSUM SYSTEM 17012003 13