Filter
Top Products
6. IMAGE CONTROL
Image 6-3
Image 6 -4
6.3 Sha
rpness (Detail) Control
H
ow to adjust the Sharpness
The Sharpness function is used to adjust the image sharpness of video signals when us ing a video decoder installed in the Cine
VERSUM Master.
To adjust the Sharpness, press the (+) or (-) side of the button ’SHARP’ (image 6-5). The following barscale is overlayed on the
source image,image 6-6.
Press the (+) or (-) button until the sharpest display is attained. Detail level should be roughly proportional to the input signal q uality.
Higher levels of detail improve good quality levels. Low levels of detail reduce noise in poor quality signals.
Image 6-5
Image 6 -6
24 R5976490 CINE VERSUM SYSTEM 17012003