Filter
Top Products
4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
4. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
Overview
• Brief introduction
• Upon first startup
• Switching the system between OPERATION and STANDBY
• Switching the system between STANDBY and ECONOMIC Standby
• Switching the system OFF completely and BACK to Operation mode
• Turning ON the system from total OFF mode
4.1 Brief introduction
About the handled system in this ma nual
The Cine VERSUM is a m odular system that provides you the possibility to connect m ore than one display device to the Cine
VERSUM Master.
In this owner’s manual, we only discuss the most common ca se : one Master linked to o ne Projector. F or info on the more complex
systems, please review the installation manual.
This is the chapter ’s structure:
• Upon first startup
• Switching the system between OPERATION mode and STANDBY
• Switching the system between STANDB Y and ECONOM IC STA NDBY
• Switching the system OFF completely and BACK TO OPERAT ION mode.
4.2 Upon first startup
Required steps
There are two steps upon first startup:
1. Press the power switch (A) on the Cine VERSUM Master. (image 4-1)
The Cine VERSUM Master goes from OFF to STANDB Y, visualized by blinking of the standby indicator
(B).
2. Press the power switch (A) on the Cine VERSUM 80. (image 4-2)
The Cine VE RS U M 80 goes from OFF to STANDBY, visualized by blinking of the standby indicator
(B).
3. Select “Power up” in the menu on the Cine VERSU M Master, using the jog dial. (image 4-3, image 4-4)
The Cine VERSUM Master and the Cine VERS UM 80 go from STA NDB Y to operation, visualized by lighting up of the proper
standby indicator
(B).
Image 4-1
Cine VERSUM Master
R5976490 C INE VERSUM SYSTEM 17012003 15