Filter
Top Products
1. SAFETY INSTRUCTIONS
1. SAFETY INSTRUCTIONS
Overview
• General Safety Instructions
• Module Related Safety Instructions
This manual is intended for the user/operator of the installed digital video distribution system. Any change
in cabling or servicing of the installed modules must be performed by service personnel having approp
riate
technical training and experience necessary to be knowledgeable of potential hazards to which they are ex-
posed in performing a task, and of measures to m inimize the potential risk to themselves or other persons.
1.1 General Safety Instructions
Lightning
For added protection for this video distribution system during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the pow er cord. This w ill prevent da mage to the modules due to a
lightning and power-line surges.
Object an d Liquid Entry
Never push objects of any kind into the modules through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electrical shock. Never spill liquid of any kind on the product.
Servicing
Do not attempt to s ervice the m odules yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all s ervicing to qualified service personnel.
Damage Requiring Servicing
Unplug the m odules from the wall outlet and refer s ervicing to qualified service personnel under the following circumstances:
• If the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the modules.
• If the module has been exposed to rain of water.
• If the product exhibits a d istinct change in performance, this indicates a need for service.
1.2 Module Related Safety Instructions
Overview
• Cine VERSUM 80
• Cine VERSUM 50
• Cine VERS UM Master
1.2.1 Cine VERSUM 80
On cooling
The cooling fan in this projector continues to run for about 1 min. after the projector is turned off. During normal operation, when
turning the power off always use the power down function on the Master or the remote control. E nsure the cooling fan has stopped
before switching off the projector using the power switch.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTION THE POWER CORD. FAILURE
TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE;
Slots and Openings
Slots and openings in the cabinet and the sides are provided for ventilation; to en sure reliable operation of the projector and to
protect it from overheating, these ope
nings must not be blocked or covered.
R5976490 C INE VERSUM SYSTEM 17012003
3