Filter
Top Products
5. Direct source selection
5.2 Return to standby mode
How to r eturn to standby remotely
1. Point the Remote Control to the front of the Cine VERSUM Master or the Cine VERSUM 80.
2. Press the standby button on the Remote Control again. (image 5-2)
The Cine VER SUM Master switches to the standby mode and switches on its turn the connected display into the standby mode.
When switching the Cine VERSUM 80 into the standby mode, a cool down period for the lamp of about 1
minute is activated. As a result, restarting of the lamp is no t possible during the cool dow n period. This mod e
is indicated by the standby LED which blinks at a beat of 0.3 on /0.3 off
22 R5976490 CINE VERSUM SYSTEM 17012003