Barco R9010310 Projector User Manual


 
6. Start up of the Adjustment mode
Entering your password
1. The first digit position is highlighted. Enter the first digit. (menu 6-2)
The highlighted square jumps to the next position.
2. Continue with the other digits
Example:2319
When your password is correct, you gain access to the selected item.
When your password is wrong. The error message Invalid password is displayed on the screen. Press EXIT to continue and to
return to the adjustment menu.
PASSWORD
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
Menu 6-2
Factoryprogrammedpassword:0000
Password remark
When re-entering the Adjustment mode, it will be necessary to enter the password again
when selecting a password protected item.
Changing your password
To change your password, see chapter Service Mode, Change Password.
6.3 Menus on Local LCD Display
Overview
When text is ’off’, no menus will be displayed on the projection screen. But
on the local LCD display, it is still possible to scroll
through the menus. The menus will be displayed line by line in the same order as they were displayed on the projection screen.
Adjustments can be done while the projector is running without projecting the disturbing menus on the screen.
Use the cursor keys to scroll through the menus and press ENTER to activate the displayed menu.
56
R5976801 SLM R9+ 20/10/2004