Filter
Top Products
7. Advanced
7.7.2 Load file
When to load a file ?
In some cases the user wants a particular file to be used for the display of a particular source. In this case the user should load the
desired file from the image files menu. The load file option will allow the user to choose between several files corresponding more
or less to the active source specifications.
In normal operation the file selection (load) will be done automatically by AutoImage.
Howtoloadafile?
1. Press MENU to activate the Tool bar
2. Press → to select the I mage files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Load
Image 7-58
5. Press ENTER
A dialog box is displayed
Image 7-59
6. Use ↑ or ↓ to select the desired file
Tip: For more information (specifications) on the image files see the Appendix section
7. Press ENTER
The file is loaded and the image is adapted.
The list of files which may be load ed will be of the data type if the active window is a data window, or they will
be of t he video type if the active window is a video window.
R59770079 BARCO ID H250/500 23/07/2007 69