Filter
Top Products
7. Advanced
7.8.8 Softedge
Overview
• Softedge Border
• Black level
7.8.8.1 Softedge Border
What can be done?
Before creating a softedge, an overlap zone had to be defined. The width of this overlap zone is fully adjustable.
The width can be adjusted for the top, bottom, left and right side of the image. The adjustment range for each border is half of the
full native size i.e 960 for the left and right side and 540 for the top and bottom.
Softedge Width setting
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Softedge
5. Press → to open the menu
6. Use ↑ or ↓ to select Border
Image 7-95
7. Press ENTER
A dialog box is displayed.
Image 7-96
8. Push the cursor key ← or → to select Enabled or Disabled to enable or disable the Softedge, press ENTER to select.
90
R59770079 BARCO ID H250/500 23/07/2007