Filter
Top Products
1. Safety
1.1 Safety guidelines
Personal protection
WARNING: Ensure you understand and follow all t he safety guidelines, safet y i nstructions, w arnings and
cautions mentioned in this manual.
WARNING: Be aware of suspe nded loads.
WARNING: Wear a hard hat to reduce the risk o f personal injury.
WARNING: Be careful while working with heavy loads.
WARNING: Mind your fingers wh ile working with h eavy loads.
Installation personnel
This installation must be performed by authorized and qualified technical personnel only.
Accredited safety officers must ensure the safety of the site, construction, assembly, connection, use, dismantling, transport etc. of
such safety critical systems.
Caution
Installationshould be performed only after youare thoroughly familiarwith all ofthe proper safety checks andinstallation instructions.
To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with SF-10V LED displays.
Do not modify and/or replicate any component. Barco uses specific materials and manufacturing processes in order to achieve part
strength. Consult Barco for assistance with custom applications.
Always follow Barco installation instructions. Cont
act Barco if you should have any question regarding the safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
Product care
Structural & mounting components should be kept dry, clean, lubricated (only if recommended), coated properly, and otherwise
maintained in a manner consistent with part design. Barco products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear,deformation, corrosion and any other circumstances that may affectthe load handling
capability of the part.
Barco recommends inspections at regular intervals for all installations and increasing in frequency for more critical installations. If
a part is found to have damage, which may cause a decrease in load capability, the part must be removed for service or replaced
immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
4
R59770542 SF-10V DISPLAY 10/02/2012