15
1
2
3
4
5
6
7
8
section
15
Using the KVM Switch
Switching the Audio/Mic
The audio/mic is independent to the KVM Switch and can be switched
independently. This means that if you are working on port 1 of the KVM
Switch, you can be listening to your music on port 3.
You can switch the audio/mic in two ways:
1. Using the direct-port selectors: The port selector has an Audio LED that
indicates which port your audio/mic is on. Push the speaker icon on any of
the four buttons and the audio/mic will switch to the corresponding port.
2. Using the pre-defined hot key: Please see the Hot-Key Quick-Reference
Table for a list of the hot keys.