Filter
Top Products
14
Connecting and Configuring your Router
Verify the contents of your box. You should have the following:
• Belkin Wireless G Plus MIMO Router
• Category 5 Networking Cable (for connecting the Router to the computer)
• Power Supply
• Belkin Setup Assistant Software CD
• User Manual
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet port. Many
modems have both an RJ45 Ethernet port and a USB connection. If you have a modem
with both Ethernet and USB, and are using the USB connection at this time, you will
be instructed to use the RJ45 Ethernet port during the installation procedure. If your
modem has only a USB port, you can request a different type of modem from your ISP,
or you can, in some cases, purchase a modem that has an RJ45 Ethernet port on it.
Ethernet USB
Setup Assistant
Belkin has provided our Setup Assistant software to make installing your Router a
simple and easy task. You can use it to get your Router up and running in minutes.
The Setup Assistant requires that your Windows 2000, XP, or Vista computer be
connected directly to your cable or DSL modem and that the Internet connection is
active and working
active and working
at the time of installation. If it is not, you must use the “Alternate
Setup Method” section of this User Manual to configure your Router. Additionally, if
you are using an operating system other than Windows 2000, XP, or Vista, you must
set up the Router using the “Alternate Setup Method” section of this User Manual.