Filter
Top Products
65
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
Setting Client IP Filters
The Router can be configured to restrict access to the Internet, email, or other
network services at specific days and times. Restriction can be set for a single
computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer for example, enter the IP
address of the computer you wish to restrict access to in the IP fields
(1)
.
Next, enter “80” in both the port fields
(2)
. Select “Both”
(3)
. Select “Block”
(4)
. You can also select “Always” to block access all of the time. Select the
day to start on top
(5)
, the time to start on top
(6)
, the day to end on the
bottom
(7)
, and the time to stop
(8)
on the bottom. Select “Enable”
(9)
. Click
“Apply Changes”. The computer at the IP address you specified will now be
blocked from Internet access at the times you specified.
Note:
Be sure you have selected the correct time zone under “Utilities>
System Settings> Time Zone”.
(1)
(2)
(3)
(4)
(5)
(7)
(6)
(8)
(9)