Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 29
Appendix A: Optional Ethernet Interface
Configuration Description
Table A-1. Controller Setup.
Item Default Settings Description
Administrator Admin The login administrator is a user-defined name that is used at login. Write
down your new Login name in a safe location for future use.
Password (Blank) The login password can be empty or 1–14 characters long. Please write down
your new password in a safe location for future use. The password is also
used while performing SNMP Firmware updates.
IP Address 192.168.1.111 Four groups of numbers assigned by the network server (DHCP mode
Enabled) or user defined (DHCP mode disabled).
Subnet Mask 255.255.255.0 Four groups of numbers assigned by the network server (DHCP mode
enabled) or user defined (DHCP mode disabled).
Gateway Address 192.168.0.1 Four groups of numbers assigned by the network server (DHCP mode
enabled) or user defined (DHCP mode disabled).
DNS Server 168.95.192.1 Four groups of numbers assigned to the network server.
DHCP Client Enable The default setting (Enable) sets the DHCP client in Dynamic mode. Dynamic
mode allows the network server to automatically assign the IP address, sub-
net mask, and gateway address.
If the DHCP client is set to disable the DHCP client is set to Static mode. Static
mode allows the user to manually assign the IP address, subnet mask, and
gateway address.
NOTE: If the user manually assigns the IP address, the DHCP client must be
set to Disable.
System Tools
Firmware Backup: Click the Backup button and you will get a pop-up to save a BIN file of the current firmware and settings.
Save in a location that will be easy for you to remember and rename the file to a name you will remember.
Figure A-7. Controller firmware backup screen.