Filter
Top Products
724-746-5500 | blackbox.com
Page 40
724-746-5500 | blackbox.com
802.3af and 802.3at PoE Gigabit Injectors
Table B-1 (Continued). SNMP MIB.
OID Name Type Value Description
2.3.6.1.4.1.24852.2.4.1.1.1~24 poeTrapsControlGroupIndex INTEGER Not-accessible Uniquely describes the
(0.65535) group the trap control is
located.
2.3.6.1.4.1.24852.2.4.1.2.1~24 porTrapsControlEnable INTEGER Trapsdisabled(1) Enables and disables the
TrapsEnabled(2) trap from the agent.
OID Name Type Description
2.3.6.1.4.1.24852.2.5.1 poePortHWFailTrap NOTIFICATION Hardware failure trap.
2.3.6.1.4.1.24852.2.5.2 poePortPeakOverCurrentTrap NOTIFICATION Peak overcurrent trap.
2.3.6.1.4.1.24852.2.5.3 poePortOverloadTrap NOTIFICATION Overload trap.
2.3.6.1.4.1.24852.2.5.4 poePortDiscoveryFailTrap NOTIFICATION Discovery failure trap.
2.3.6.1.4.1.24852.2.5.6 poePortDisconnectTrap NOTIFICATION Port disconnect trap.
2.3.6.1.4.1.24852.2.5.7 poePortVoltageFailTrap NOTIFICATION Port voltage fail trap.
The Ethernet interface that the PoE Gigabit Injector performs under is TCP/IP, UDP port of 161. UDP port 161 for SNMP is an offi-
cial IANA registered EDP port number. While attempting to connect to the Ethernet interface PoE Gigabit Injector via a different
network domain, you must acknowledge that the local network supports the UDP port 161.
Different Network Domain
Building #2 Network Domain
254.168.2.xxx
Building #1 Network Domain
192.168.xxx
Network Domain
3rd floor 192.168.xxx
2nd floor 192.168.2.xxx
1st floor 192.168.1.xxx
Figure B-1. Network Domain Diagram.