Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
160
Use authenticate show to display the current authentication method selected, servers in use if any, and the
number of successful and unsuccessful login attempts by dial-in clients. If SecurID is being used,
additional configuration status is displayed.
authenticate test user-id
Use authenticate test to test the authentication method (RADIUS, SecurID or local) of a client.
authenticate timeout value_in_seconds
Use authenticate timeout to specify the timeout value used when the Router contacts a RADIUS or SecurID
server. The timeout value is the time that the client will wait, in the event that no servers reply, per
available server. The total timeout is the timeout value times the number of servers available. The
default timeout value per RADIUS server is 10 seconds. The default timeout value per SecurID server
depends on the each server’s configuration, but is typically 3 seconds.
2.5 client
Manipulate the Router client database
Syntax
client add [-e] [clientname]
client delete [all | clientname]
client list [clientname]
client modify [clientname]
Description
The client command allows the administrator to manipulate client account database records. Each client
record you manipulate has the following characteristics:
• client name
• client password
• account enabled
• access time
• time quota
• idle timeout
• callback phone#
The client database supports up to 100 clients. To permanently save modifications to the client
database, execute the config save command after you make changes with the client command. If no
name is supplied on the command network, you will be prompted for a client name.
Subcommands and parameters
client add [-e] [clientname]
Add a new client record to the database and specify its characteristics.
[-e] The express option adds clients automatically entering default values to access time (24 hours),
idle timeout (240 seconds or 4 minutes) and time quota (1440 minutes or 24 hours) so you do not need
to provide these values individually. This is the fastest way to add clients to the database.