Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
36
The serial terminal should not be used by users to gain access to local or remote networks. This
method of access is illegal.
1. Using the serial cable provided, connect a serial terminal to the console port of the Router. If
necessary, use the adapter provided with the console cable. Set the serial terminal to 9600 bps, no
parity, 8 data bits, and 1 stop bit.
2. Insert the boot diskette into Router’s diskette drive.
3. Start the Router. Typically it takes 2-3 minutes to load the contents of the boot diskette. This is
normal. After the Router finishes starting, the diskette drive LED will turn off. Do not proceed until
this LED turns off.
4. When you see a login prompt, type root and press the RETURN key. When prompted for the
password, press the RETURN key.
5. Proceed to Chapter 5 to install the software.