Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
212
3.16 tcp/ip
Change the Router mode to TCP/IP
Syntax
tcp/ip [tcp/ip_command [param]...]
Description
When in IPX mode, use the tcp/ip command to enter the TCP/IP mode. The Router is always in one of
two modes, and the prompt always indicates the mode:
(tcp/ip)Router> Router is in TCP/IP mode
(ipx)Router> Router is in IPX mode
The protocol mode is set on a per-session basis. Individually logged in users can have different modes
set. Depending upon what mode it is in, the Router software selects the command set and help/usage
strings available to the user for the current mode (protocol).
You can also execute a command from a different mode by prefixing the command with the mode. For
example, to dump the TCP/IP routing table while in IPX mode, at the prompt enter
(ipx)Router> tcp/ip route
This command will switch to the TCP/IP mode, execute the route command, and then return to the
IPX mode.