Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
179
• ACCM - 0xfffffff
• ACFC - off
• authentication - none
• Magic number - off - not negotiated
• MRU - 1500 octets
• PFC - two-octet fields
• timeout - 3 seconds
ppp iface lcp timeout [seconds]
Timeout—Sets the timeout interval.
seconds—Displays or sets the interval to wait between LCP configuration or termination attempts.
The default is 3 seconds.
2.18.4 IPCP N
EGOTIATION SUBCOMMANDS
ppp i&g_iface ipcp {local | remote} address
[on | off | allow [on | off]]
local address.enables or disables negotiation of the local address. By default, no addresses are
negotiated. Allows a Router to either request that the remote end set the IP address by putting 0.0.0.0
as the local address or to suggest the remote end allow the Router to set its IP address by configuring
a non-zero remote address.
NOTE
You can specify the local address using the ifconfig command. The default local IP
address is the address set with the “ip address” command.
ppp i&g_iface ipcp {local | remote} compress
[tcp slots [flag] | none | allow [on | off]]
TCP compression—Displays or sets the local or remote TCP compression options. The default is that
compression is on and that the number of slots is 16 and the flags default to 0. In addition, non-
compression can be specified for the local or suggested for the remote side.
slots default is 16.
flag default is 0.
2.18.5 IPXCP N
EGOTIATION
ppp i&g_iface ipxcp {local | remote} compress
[cipx [slots [flag]] | none | allow [on | off]]
IPX compression—Displays or sets the local or remote IPX compression options. By default compression is
on, the number of slots is 16 and the flags default to 0. In addition, non-compression can be specified for
the local or suggested for the remote side.
slots default is 16.
flag default is 0.