Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
162
2.6 config
Configures the parameters required for the Router to operate properly. More sophisticated
configurations must be accomplished with individual commands.
Syntax
config firewall iface
config modify
config reset
config save
config show
Description
config firewall iface
Configure an IP firewall on the iface interface. Refer to the User’s Manual for the list of IP filters used in
the firewall.
config modify
Modifies the current configuration. Displays the current setting for each configuration item as it is
entered and allows the user to change the value.
config reset
Resets the Router to its default state. This is useful if the administrator wants to completely clear out a
previous configuration. When this configuration is done, the Router is rebooted.
config save
Saves the current configuration including all items set by individual commands, so that the Router will
be properly configured at the next system start.
config show
Displays the current configuration as a list of individual commands executed when the Router is started.
2.7 date
Display or set the date
Syntax
date [yymmddhhmm [.ss]]
Description
Sets the Router clock’s current date and time to what you enter. Displays the clock’s current date and
time if you do not enter anything.
Subcommands and parameters
date [yymmddhhmm [.ss]]