Black Box SW723A-R4 Switch User Manual


 
78
SERVSWITCH™
Appendix A: NVRAM Factory Defaults
A.1 Keyboard-Command Settings
The tables below shows, for the ServSwitch’s keyboard-command configuration
options, the default values stored in nonvolatile memory (NVRAM) when the
ServSwitch is shipped from the factory. It also shows what commands or actions can
change these settings for the Switch’s current operating period, as well as what
commands or actions (if any) can save changed settings to NVRAM, so that they
become the new defaults.
[Ctrl] K
Type [Ctrl] Vxcx [Enter]
(xxx = any 1- to 3-digit number,
time in seconds, or 0 to disable)
0 (disabled)Screen-Saver
Delay Time
Can’t be
saved
Type [Ctrl] S (to turn ON) or
[Ctrl] X (to turn OFF)
OFFScan
Can’t be
saved
Select port, then press the
corresponding button on the
keyboard
Num Lock ON (fixed)Caps/Scroll/
Num Lock
To Save
Changes
To ChangeFactory-Default SettingOption