Filter
Top Products
50
SERVSWITCH™
5. Operation: On-Screen Display
5.1 Overview
You can use the ServSwitch’s on-screen display to:
1. Configure the ServSwitch through a series of configuration menus (trig
gered
with the [Ctrl] [F12] command, where [Ctrl] is the left Control key).
2. Switch to different computers from a window which shows a list of computer
names (triggered with the
[Ctrl] [ESC]
command,
where [Ctrl] is the left
Control key
). You can change the color and position of this window.
3. See the name of the computer you are currently switched to. (The font, color,
position, and timing of displayed text are all user-selectable.)
5.1.1 T
HE
M
AIN
M
ENU
Access the main menu by pressing and releasing the left [Ctrl] key and then hitting
the [F12] key. The menu, shown in Figure 5-1 below, appears. (The “Enter
password” prompt will appear only if you set a configuration password through the
“Configure security” menu; see Section 5.5. If the prompt is on screen, you must
enter this password before the ServSwitch will allow you to make any configuration
changes through the display.)
Figure 5-1. Main configuration menu.
ServSwitch version UP11 Copyright 1990-1999
Main configuration menu
Configure system
Configure computers
Configure overlay
Configure security
Exit
Enter password
Use arrow keys to highlight
selection and press enter or
press escape to exit
Main configuration menu
Enter password