Filter
Top Products
ATM/POS Bridge Configuration | en 17
Bosch Security Systems, Inc. Installation Manual F.01U.171.816 | 1.0 | 2010.09
5. Launch Internet Explorer and navigate to the default bridge
IP Address: 169.254.1.1
Internet Explorer displays the ATM/POS Bridge interface.
6. Click the Network Setup link in the navigation pane.
7. Type an optional name for the bridge in the Bridge Name
input box. This name facilitates recognition of the bridge
on the network.
8. To change the network settings for the bridge, type a valid
IP Address, Subnet Mask, and Gateway in the appropriate
input boxes.
Note: The MAC Address cannot be changed.
9. Click the Save button to accept the network settings and
to apply these settings to the bridge.